IMPORTANT INFORMATION:
PROPORTIONAL HEIGHT OF STICKER
Let’s look at 6″ inch!
Imagine your sticker in the box, but what percentage is its height..
You can choose from the following 4 size boxes:
25%; 50%; 75%; 100%
In the case of 25%, the sticker below (+-10 percent tolerance):
In the case of 50%, the sticker below (+-10 percent tolerance):
In the case of 75%, the sticker below (+-10 percent tolerance):
In the case of 100%, the sticker below (+-10 percent tolerance):
If you enter it incorrectly, we will change it to the correct height based on the rules.
If you have any questions, feel free to contact us!
PIECE PRICE CALCULATION
There are two stickers in the picture above, so in that case you have to put the stickers in the basket separately!
The price applies to one sticker! Your uploaded graphic should include one piece. If you want more of it, change the number of pieces!
For larger quantities (10+ pcs), contact us on Messenger, so we can get a discounted unit price!
You can reach us here:
m.me/jdmdecalshop
ACCEPTED FILE TYPES
VECTOR files (.ai, .pdf, .cdr) are preferred for best quality. In this case, we can make the sticker as quickly as possible!
We are flexible, we process almost any file from image format. The part you want to cut is converted into a vector for FREE.
SIZE AND POSITION
The sizing of the stickers is based on a box model. Let’s look at 6″inchcentimeters.
If the selected sticker is relatively square, the size will be 6″ x 6″ cm.
If, on the other hand, the sticker is relatively wide, it will be 6″ cm wide, and the height will be whatever you want!
The longer the text, the smaller the height!
The sample below shows the height for a longer or shorter name.
FREQUENTLY ASKED QUESTIONS (FAQ)
Can I save a picture from the internet and upload it to make a sticker?
Answer: Yes, but make sure it is at least 300 dpi (the image must be high resolution)
Can you make multi-colored stickers?
Answer: Yes and No. Cut out stickers have no background. We have to work with a single color, so in the case of a colored sticker, several colors can be layered during installation. For color planning, contact us before purchasing more! If the design file you uploaded is multi-colored and you didn’t know what you were buying – we will cancel the order without notice (we will refund you if you paid by card).
What is the difference between a Raster file and a Vector file?
A vector file is an image that consists of nodes, shapes, and paths (not pixels). Vector graphics can be scaled to any size without loss of quality and usually have very small file sizes. Vector files are created using graphic design software such as Adobe Illustrator, Corel Draw, etc. | We recommend exporting in high resolution, at least 300dpi in jpg or png format!
A raster file consists of pixels (small squares). Every photo or raster-based graphic consists of pixels, otherwise a pixel graphic is a digital image in which each pixel is defined independently. When zooming in, the quality deteriorates. The resolution of images is measured in ppi (pix per inch) or dpi (printed dots per inch). The higher the resolution (ppi or dpi) of the image, the better it will be cropped.
WHAT PICTURES ARE ACCEPTABLE AND WHAT SHOULD THEY LOOK LIKE?
We accept:
(vector graphics)
We do not accept:
Do you have a question?
If you think the chosen sticker does not fit and you are unsure, send us a message, we will help!
50%
75%
100%